Quick Answer: Typical Metal Roof Cost In Texas
For most Texas homes in 2025, installed metal roof prices generally fall into these ranges:
- Standing seam: $10–$16 per sq. ft. installed (premium look, concealed fasteners). That’s about $1,000–$1,600 per “square” (100 sq. ft.).
- Exposed-fastener / corrugated (R-Panel/7⁄8″ corrugated): $7–$12 per sq. ft. installed, or $700–$1,200 per square.
Real-world totals:
- ~1,500 sq. ft. roof → $15,000–$24,000 (standing seam) or $10,500–$18,000 (corrugated).
- ~2,000 sq. ft. roof → $20,000–$32,000 (standing seam) or $14,000–$24,000 (corrugated).
- ~2,500 sq. ft. roof → $25,000–$40,000 (standing seam) or $17,500–$30,000 (corrugated).
These ballparks align with top Texas pages that cite project totals spanning roughly the low-$6k’s to mid-$30k’s depending on size, system and options.
Metal Roof Price Breakdown (Materials, Labor & Extras)
When we build quotes for Houston homeowners, we separate costs into:
- Panels & trim: profile (standing seam vs corrugated), paint system (PVDF/Kynar vs SMP), and gauge (thickness) drive material price. Premium panels (24-ga standing seam with PVDF) cost notably more than 26-ga corrugated with SMP.
- Underlayment & accessories: synthetic underlayment, fasteners, flashings, vents, ridge caps small line items that add up on complex roofs.
- Installation complexity: steep pitch, lots of facets/valleys, skylights, penetrations (pipes, chimneys), or coastal details (sealants/fasteners) raise labor time.
- Tear-off & disposal: removing old layers, hauling and landfill fees vary by roof size and municipality. (Competitor guides in Texas list a broad total range that shifts with these factors.)
Standing Seam vs. Exposed-Fastener (R-Panel/Corrugated): Cost In Texas
- Standing seam (snap-lock or mechanically seamed): clean lines, concealed fasteners, excellent weathering and resale appeal; higher upfront cost ($10–$16/sq. ft. installed).
- Exposed-fastener (R-Panel/7⁄8″ corrugated): strong and budget-friendly, but visible screws require periodic monitoring; $7–$12/sq. ft. installed.
If you’re maximizing curb appeal + longevity, standing seam wins. If your priority is lowest installed cost with a metal look, exposed-fastener panels are the value pick. (General consumer guides echo similar spreads.)
What Drives Your Price In Houston? Pitch, Tear-Off, Decking & Complexity
Greater Houston roofs often see wind + hail exposure and hot attics. Your estimate moves up or down with:
- Pitch & story count: steeper, taller roofs require more safety setups and time.
- Decking repairs: replacing rotten sheathing adds materials and labor.
- Old roof removal: single vs. multiple layers, plus disposal fees.
- Details: skylights, chimneys, solar arrays, and intricate valleys add trim and labor.
Cost By Roof Size (Per Square) With Realistic Ranges
To self-estimate, multiply the installed $/sq. ft. by your approximate roof area (or use “squares”: 1 square = 100 sq. ft.).
| Roof Size | Standing Seam @ $10–$16 | Corrugated @ $7–$12 |
| 1,500 sq. ft. | $15,000–$24,000 | $10,500–$18,000 |
| 2,000 sq. ft. | $20,000–$32,000 | $14,000–$24,000 |
| 2,500 sq. ft. | $25,000–$40,000 | $17,500–$30,000 |
These are installed estimates using current national/Texas guidance; your home’s pitch, tear-off, ventilation upgrades, and panel selection will shift the final bid.
Gauge (24 vs 26), Paint (PVDF vs SMP) & Warranties: Why They Change Price
- Gauge: Lower number = thicker metal. 24-ga standing seam is stiffer, looks flatter, and costs more than 26-ga.
- Paint system: PVDF (Kynar 500®) coatings deliver better fade/chalk resistance (great for Texas sun), priced above SMP.
- Warranties: Longer finish warranties and coastal-grade fasteners/trim add to materials cost. Manufacturer guides lay out these differences and why premium systems run higher.
Houston Climate Considerations: Heat, Hail & Energy Savings
- Heat: Cool-roof colors and PVDF finishes can help reduce heat gain when paired with proper attic ventilation important for our humid subtropical climate.
- Hail/Wind: Opt for impact-resistant assemblies and fastener schedules appropriate for your exposure; standing seam’s concealed fasteners reduce long-term maintenance points.
- Salt/Coastal zones: West-side inland suburbs vs. coastal exposures (Galveston) may merit different metal choices and hardware. (General best-practice guidance from metal manufacturers and consumer resources.)
When A Metal Roof Pays Off vs. Architectural Shingles In Texas
Metal systems cost more upfront than shingles, but offer longer service life and lower maintenance especially valuable after storms. Many Texas homeowners choose metal for resale appeal, durability, and insurance discussions after hail events. Price guides for shingles vs. metal show metal on the premium end per sq. ft., but often with better lifecycle economics.
How To Get An Accurate Quote In Houston (Checklist)
When you request a bid from Rhinovations (Houston/Katy), have this ready to tighten your estimate:
- Approximate roof area (or home square footage + a few photos).
- Current roof layers (any prior reroofs?), leaks, and attic ventilation status.
- Preferred system (standing seam vs R-Panel) and color family.
- Must-have upgrades (underlayment type, ventilation, skylight re-flash, gutters).
- Timing & access (trees, pool protection, pets).
We’re a local Houston roofing contractor with years serving the metro area ask about inspections, financing options, and storm-readiness upgrades.
Frequently Asked Questions (Texas Metal Roofing Costs)
Is standing seam worth the premium in Texas?
If you want the cleanest look, fewer exposed fasteners, and strong resale appeal, yes expect $10–$16/sq. ft. installed vs. $7–$12 for corrugated
What’s a typical total for a 1,500-sq-ft roof?
Roughly $10.5k–$18k (corrugated) or $15k–$24k (standing seam), depending on pitch/complexity and options.
Why do Texas pages show such wide ranges?
Because roof size, tear-off, pitch, and system choice move the total dramatically local competitor pages cite totals from roughly $6k to $35k+ for different scenarios.
Do metal roofs help with energy bills?
Cool-roof finishes and proper ventilation can help manage attic heat; results vary by house design and HVAC.
How fast can you install in Houston?
Lead times vary by season and weather. Contact Rhinovations for a local timeline and free inspection.
Conclusions
If you’re comparing metal roofing costs in Texas, start with system choice: standing seam ($10–$16/sq. ft.) vs corrugated ($7–$12/sq. ft.). Then factor in pitch, tear-off, and details to land on a realistic total. For a Houston-accurate price and options that fit your home and budget, book a free inspection with Rhinovations we’ll walk you through materials, colors, and timelines step-by-step.